The wireless MUX transmits 16 digital and 2 analogue signals bidirectionally with an operating distance of up to 400 metres.
The system is ready straight out of the box and requires 24Vdc power only. Wire your I/O as required and you are good to go – No configuration required!
Wireless MUX utilises the full power of industrial Bluetooth and will coexist with other 2.4GHz systems such as WLAN. Not only does this system solve a massive array of applications but it saves you time and money.
Your I/O communication can benefit from the advantages of Bluetooth technology. Easy to install and providing reliable transmission, Bluetooth is the ideal solution for data transmission at input and output level.
Your advantages
- Quick and easy startup, thanks to automatic configuration
- Rugged and reliable transmission, thanks to redundant wireless channels
- Minimal planning required, due to interference-free parallel operation of numerous Bluetooth systems as well as operation with WLAN
- Protected against manipulation and tapping, thanks to encrypted transmission
Bluetooth multiplexer as a wireless control cable
The Wireless MUX can be installed very quickly: connect, switch on, and you have a working wireless path. The system transmits 16 digital and 2 analog signals bidirectionally. This means that it can therefore replace a 40-wire signal cable.
Do you require more signals?
Use the MODULAR MUX SD memory card to create a modular transmission system for up to 4096 I/O points: with two ILC 170 ETH controllers and the FL BT EPA AIR SET wireless modules. SafetyBridge technology can also be included on request.
Bluetooth I/O devices as a wireless fields extension
Connect your I/O signals to the fieldbus infrastructure using the Fieldline installation system. The Bluetooth base station automatically controls communication with the bus terminal modules. The system typically transmits time-critical process signals in 10 ms per module. You can therefore still use your fieldbus technology on robots or rotating machines, while enabling wear-free communication with the higher-level network.
For additional information on the Bluetooth MUX wireless I/O or any of our other industrial wireless solutions please contact us. Additionally a brochure on the products may be downloaded below.