The XS range is an offer of inductive proximity sensors. These sensors enable the detection, without physical contact, of metal objects. This general purpose inductive proximity sensor supports 2.5mm nominal sensing distance and 1 normally closed discrete PNP output. This cylindrical sensor, long case model, is flush mountable and features a M8 connector. It has a cylindrical Ø 8mm case, threaded M8 x 1, allowing for greater machine miniaturization. It is a 3-wire DC sensor, 12V to 48V rated supply voltage with protection against reverse polarity. It is furnished with an M8 connector for electrical connection, and 1 yellow LED for output state indication. It is an IP65, IP67 and IP69K rated product, operating in temperatures from -25°C to +70°C. The case is made of stainless steel, grade 303. Its dimensions are 58mm (length) x 8mm (diameter) and weighs 0.015kg. Its range of applications are very extensive and includes monitoring the position of machine parts (cams, end stops, etc.) and counting the number of metal objects, etc. This product is certified by UL, CSA and CE. A fixing clamp XSZB108, intended for the diameter 8mm sensors, can be purchased separately. The minimum mounting distances between sensors are 5mm for a side by side mounting and 30mm for a face to face mounting. Our inductive sensors come in flush and non-flush versions (shielded / non-shielded), short and long body versions, PNP and NPN versions to be compatible with all PLCs and controllers worldwide.